Ifmodeshow – show interface mode (duplex) Zoneshow – Show zone and switch aliases IP Switchshow – Show switch ports and connections
Supportshow – Like Sun’s explorer – gets many configs at once
#Onvif server serial numbers
Gbicshow – Show GBIC slots and serial numbers Switchstatusshow – Overall status of switch Config Tempshow – Show switch TEMPERATURE values Version – Gives versions of firmwares & OS Hardware State Simply type “help” and look for the command you think you need, but what exactly does each command do? Here’s a list: Info Lenovo G8272 and EN4093R Invalid Signature Firmwar.Brocade commands are usually very easy to find out.If you type # cfgshow it will show all zones and aliases from both switches, but only those from the primary are in the active config.You should also see both switches in the same fabric now: # fabricshowThis should show the names of the primary & secondary switches.Wait some time and the name of the primary switch will appear between the double quotes.You should see in the line of the port connecting the switches something like this:ģ5 35 1f2300 id 8G Online FC E-Port 10:00:00:xx:xx:xx:xx:xx "" (upstream) Wait 10-50 seconds, then check the switch: # switchshow.Enable the secondary switch: # switchenable.Disable the secondary switch to make it the slave and to add the config from the primary:.Wait 10-30 seconds before proceeding to give enough time for the link to establish and the 2 switches to talk.Now enable the port connecting the secondary & primary switches: # portenable 35.On the secondary switch, disable the config: # cfgdisable.We will need them after this step: # cfgshowĬopy the output and save it in a text/word file. First, save the current zone names of the secondary switch in a text file.Do not connect any FC cables between the HP/IBM (different switches) until you're told to do so.
#Onvif server password
If they are different, "Zone Conflict" error will show on the secondary switch. Switch configuration names must be the same for the fabric to merge.The 2 switches connecting to each other must have different Domain IDs. Change Domain ID from default value to a unique value.It's available by default on 48-port switches.
#Onvif server full